- Forgot the Ridgid multitool
...no cutting fiberglass holding the v-berth today
- Drilled out head of two #2 Robertson screws securing port side of the v-berth. Head were stripped.
- Found an additional #2 Robertson screw securing port side of the v-berth. Removed.
- Port side of the v-berth loose but for the fiberglass.
- Vent from the holding tank under the port side of the v-berth is too tall. Must create a relief in the wood panel to cover the opening.
-
- Removed bulkhead mount Navigator Bulkhead Mount compass
compass to refill and replace LEDs.
- Verifed that all electronics and lights work as they did before moving the mast forward.
- Anchor Light
- GPS
- Side Lights
- Steaming Light
- Stern Light
- VHF
