- Sanded teak cleat from front bulkhead of v-berth 150 grit and 220 grit using the Ridgid quarter sheet sander
-
- Acetone cleaned teak chimney trim ring.
- Applied first coat of Cetol Marine Natural Light
to teak chimney trim ring.
-
- Applied second coat of High Gloss White
to
- the hull to deck joint,
- the forward bulkhead,
- the aft bulkhead,
- the hull above the shelf,
- the top side of the shelf,
- the under side of the self,
- the vertical face of the forward hatch opening,
- the area around the deck organizer located on the port side at the forward end of the coach roof,
- the perimeter of the port side of the v-berth flat, and
- a strip about two inches wide around each of the items above so that the rest can be rolled rather than brushed.