- Removed head door which was secured by 9 #8 3/4" phillips screws. MISSING one screw.
- Removed hanging locker door which was secured by 9 #6 3/4" square drive screws.
- Removed four 1/4" bolts holding the head to the floor.
- Removed toothbrush holder.
- Removed toilet paper holder.
- Removed soap tray above Pullman sink.
- Removed Pullman sink.
- Removed trim at front edge of head floor and at base of head door.
- Removed brass fresh water naval pump.
- Removed fire extingisher holder.
- Removed mirror.
- Removed toilet instructions plaque from Wilcox & Crittenden.
- Removed sanitation hose from head thruhull using Weller(?) heat gun to soften the hose. 20 seconds on low works well.
- Removed head cabinet doors.
- Removed brown fake wood shelf paper from inside head cabinet.
- Removed screws holding bottle/drink shelf in salon to the bulkhead.
- Removed screws holding magazine rack in salon to the bulkhead.
- Removed three bolts holding a U-shaped block in salon to the bulkhead.
