- Picked up standing rigging order from SailingServices
from Jonathan Adams house.
- Returned borrowed power tools to TC Williams.
- Filed the mast deck plate with a flat file to remove the mid-plate bump and create an approximately flat surface. Fore-n-aft wobble gone. Some side to side wobble remains.
- Tried to remove the D-shackle connecting the spinnaker halyard block to the masthead. No joy. Bail of spinnaker block is too short to allow the clevis pin to pass through.
-
- Need to space the wind instrument off the masthead a bit so that the wires lead cleanly down the side of the mast. -- Done 2020-05-04
