- Removed both Harken deck organizers from near the forward end of the rails on either side of the cabin top.
- Removed all machine screws from the Lewmar triple line clutch from the starboard side of the cabin top. The line clutch is quite well adhered to the cabin top. Put one machine screw back in to make sure that the line clutch does not suddenly release from the cabin top and fall overboard.
- Removed the Spinlock triple line clutch from the port side of the cabin top.
- Removed both Lewmar Ocean 16 winches from the cabin top.
- Removed the front of the lockers below the side decks, port and starboard by removing the wood screws and cutting the fiberglass tabbing. Was able to pull aways the remainder of the fiberglass tabbing from the underside of the side decks rather easily.
-
- Replaced the seat in the head.
-
- Removed a couple screws from the metal rail on the port side. Screws are fine. Rust staining coming from the rail itself? Will need to remove the rail to verify.