- Prepared for sanding port side of cabin by disconnecting all wiring from terminal block in the head and coiling them near the breaker panel.
- Starting at 2:30PM, began sanding port side of overhead of cabin with 150 grit paper. Continued down the cabin wall, under the sidedecks, settee back and seat using newly purchased Ridgid quarter sheet sander.
- Lightly sanded inside the drop space behind the settee back.
- Again, seemed to have removed more than a pound of paint dust.
- Knocked off at 5:30PM.
- Completed sanding of cabin but for the galley, the rear wall below the bridge deck, and the "cave" outboard of the icebox.
