- Loosened two of the remaining five screws holding the winch to the mast using an impact driver. This work was begun on 2021-12-16.
- The heads of two of the remaining five screws holding the winch to the mast broke/sheared due to the impact driver's torque.
- The final screw of the six resisted. Will revisit that screw.
- Sanded fiberglass repair to rudder that was done on 2021-12-16.
- Removed all fasteners from the port aft deadlight. Does not "just pop out". Will need some work with a putty knife.
- Secured a blue plastic trap over the cockpit.