- Sanded the filled areas, the areas of the mid-rudder gudgeon and pintle.
- Sanded deep spot on port bow due to pulling a bit of tape out from behind the epoxy barrier layer. See photo below.
- Attempted to sand the strip (~1") of bottom paint above the epoxy below the boot stripe. Will take too long. Forget it. Cover with bottom paint.
- Rinsed, scrubbed and rinsed the hull from the bow aft to the cockpit scuppers.
- Filled the areas of the mid-rudder gudgeon and pintle.
- Sorted out a bit of the accumlated items in the cabin and v-berth.
