Log of Alberg 30 #262 on 20 November 2024


Purpose: Various
Complement: Yoni Bresler

  • Replaced sealant where the chainplates pass through the deck.
  • Cut a 1/4" diameter drain hole in the aft (low) side of the head locker.
  • Sealed the wood of the head locker face with epoxy.
  • Touched up the epoxy filling (mostly) the inner jib track mounting holes so that they are completely full.
  • Filled the #10 wood screw holes in the port toe rail where the bow chock had been will 3/16" wooden dowel. Sealed all surfaces of the 3/16" wooden doweling with epoxy.
© Jonathan M. Bresler