- Removed tarps used to contain dust when longboarding.
- Cleaned up worksite in preparation for launch.
- Filled narrow crevice between original toerail and fill piece with thickened epoxy.
- Washed main cabin with Formula B (Good Old Boat)
.
- Applied last coat of Trinidad XSR
to areas that were covered by the jackstands.
- Re-installed mainsheet.
- Tried burnishing the bottom again with 400, 320, 120, and 80grit sandpaper. Paper does not load up as it did on 2025-04-08. Seems significantly harder to sand than Trinidad Pro
.