- Installed Ronstan RF41100 40mm single swivel block
for the genoa halyard to replace a Harken 38mm Big Bullet Block — Shackle
that lost its sheave.
- Removed ten year old padded covers at the ends of the spreaders. Installed a second pair of Harken Sail Chafe Protector
; center drilled out to 5/16". There are now a pair above the spreader, installed 2020-07-21, and a pair below the spreader held up with zip-ties.
-
- Problems using the Beal Jammy
during the descent. Having wrapped it four times around both lines passing through the ATC Guide
, it would seize tightly, at times preventing me from being able to slide it downn the lines.