- Sanded cockpit seats and companionway trim with 120 grit per Application Instructions.
- Used acetone to de-grease cockpit seats and companionway trim.
- Applied Awlwood
yellow primer to cockpit seats and companionway trim.
- Removed finish from icebox lid.
- Sanded icebox lid.
-
- Used WestSytem epoxy to fill crack extending full width of icebox lid using a syringe repeatedly to re-fill the crack as the epoxy ran down deeper into the crack. The bottom of the crack had been closed using blue painter's tape.
-
- Next steps:
- Apply first finish coat to get back to cockpit locker seat lids and companionway trim.
- Apply first finish coat to coamings.
- Finish applying Rustoleum to the areas inside the cabin and the starboard cockpit locker where the coaming return blocks, instruments, and engine controls will be mounted.
