- Sanded cockpit seats and companionway trim with 220 grit per Application Instructions.
- Removed sanding dust from cockpit seats and companionway trim using a rag -- NOT a tack rag.
- Sanded coamings with 220 grit.
- Applied first coat of Awlwood
clear gloss to cockpit seats and companionway trim. Awlwood clear gloss is a viscous liquid. Reacts with the humidity in the air to cure.
- Removed sanding dust from coamings using both a rag and a tack rag.
-
- 3rd Rustoleum cabin aft interior bulkhead.
- 2nd Rustoleum starboard cockpit locker for engine controls.
- 2nd coat of brightside on port winch base.
- Additional coat of brightside on bridgedeck indent cover.
- Sand and Pre-Kote rim of companionway.
- 1st Pre-Kote of ruddershaft penetration.
-
- Next steps:
- Apply second finish coat to cockpit locker seat lids and companionway trim.
Note: The lighter colored bands running side to side are due to reflection, not due to the wood. The vertical dark streaks are in the wood.