- Lightly sanded cockpit seats and companionway trim with 220 grit per Application Instructions.
- Removed sanding dust from cockpit seats and companionway trim using a wet rag -- NOT a tack rag.
- Applied second coat of Awlwood
clear gloss to cockpit seats and companionway trim.
-
- 4th Rustoleum cabin aft interior bulkhead.
- 3rd Rustoleum starboard cockpit locker for engine controls.
- 3rd coat of Brightside
on port winch base.
- Additional coat of Brightside on bridgedeck indent cover.
- Sand and 2nd coat of Pre-Kote
rim of companionway.
- Sand and 2nd coat of Pre-Kote of ruddershaft penetration.
-
- Next steps:
- Apply third finish coat to cockpit locker seat lids and companionway trim.
- Apply Brightside to companionway rim and ruddershaft penetration.
- Reinstall engine controls.